Соединенные Штаты АмерикиМассачусетсКэмбридж42.375-71.118Страницы контентаFIRE<br>PROTECTIONСтраницы контентаFIRE RETARDANT COATINGСтраницы контентаSTRENGTH AND RELIABILITYОсновные параметрыh1STRENGTH AND RELIABILITYContent<p>INFLEX® is a unique PU-based compound which is designed and serially produced to provide fire resistance of metal load-carrying structures. The material protects the structures not only against standard cellulose fire, but it also provides for their fire resistance in the real event of hydrocarbons – oil and oil products fire.</p>
<p> For structural protection against standard fire: <br /> <br />• INFLEX®-FO-11 (FV-11) coatings are intumescent 1-component thin-layer compounds <br /> <br />For protection against hydrocarbon fire: <br /> <br />• INFLEX®-FA-21 is a 2-component weather-resistant intumescent compound <br /> <br />For protection of metal structures with the effective metal thickness ≥ 5,8 :<br /> <br />• INFLEX®-FV-11K (FA-21K) is a structural fire protection system. <br /> <br />UIC Ltd. is the official representative of Progress Ltd., the manufacturer of INFLEX® fire-retardant compounds</p>
<p> </p>
<p>Unlike epoxy-based compounds, INFLEX® is a PU-based material which provides for the highest level of flexibility, together with the required fire-proof efficiency, resistance to aggressive environments and extremely low temperatures. </p>
<p>Flexibility of INFLEX® coating provides for its integrity not only on installed metalwork on site, including temperatures lower than 55°С, but also on modular structures produced on metalwork factories, during their transportation and handling operations. </p>
<p>The life time of INFLEX® is over 15 years and can be applied in open air conditions with the temperature down to minus 60°С. The specimens with the coating thickness from 1 to 21 mm were tested under exposure of UV, high temperature steam, sulphurous oxide, sea water sprinkling, -60°С and +50°С temperatures. The report with the result of conducted accelerated climatic tests confirmed that the life time of Inflex fire-retardant coating is at least 15 years under exposure of moderate and cold climate and aggressive environments.</p>
<p>To verify the maintenance of the main function of the fire-retardant coating throughout the whole operation time, i.e. provision of fire resistance of metalwork, after climatic test the fire tests were successfully completed to check the fire efficiency of INFLEX® compound.</p>
<p>The coating is successfully operated at the facilities under extremely low temperatures in such towns as Usinsk, Novy Urengoy, Surgut, where the average daily air temperature goes down to minus 55°С, which is confirmed by the official letter from Gazprom Pererabotka Ltd. regarding the coating durability during operation in open air conditions without any top coat at Surgut Condensate Stabilization Plant. </p>
<p>To verify that INFLEX® fire-retardant compound can be used in various conditions it was tested to check the seismic resistance and chemical resistance to industrial pollutants.</p>Отображение в менюImage for title/images/img/11.pngДополнительные параметрыShow submenu1